Scaling In And Out of Trading Positions (2024)

Introduction

If any trader is sure the next deal will be a winner, he will use all his capital to enter this transaction, but because trading is based on the probabilities, it is impossible to say whether the next position will be a winner or loss, so professional traders use small trading volumes at the beginning of the deal and the more confident they will be in the success of this trade, they decide to buy more contracts or shares to increase the expected profits and take advantage of the validity of their expectation. The trader sells some quantities to book some of the profits and reduce the risk. This method is widespread among professional traders, especially what is known as Trend Following Trader.

What are scale-in and scale-out?

Scaling in trade means opening a position with a fraction of the capital you intended for yourself to enter more positions when the trade moves in your favor. Institutions like mutual funds have to scale into and out of positions constantly because they receive new money and requests for redemptions every day. Individual traders commonly use scaling in when they enter in the direction of the trend during a pullback and when prices move higher in the trend direction to improve their dollar cost average. And scaling out means that when you exit, you exit only part of your position and look to exit the rest later. More traders are willing to scale out than are willing to scale in; in fact, many traders regularly scale out of trades.

Should Trader scale in positions?

Scaling in is just an option, you can choose not to use it if you don’t want to, but it has several considerable advantages, which make its utilization useful. First, you reduce the total risk of your trade. By scaling in you commit with only a fraction of your funds upon entry in the long position. instead of going long with one standard lot, you can enter a position by committing yourself with a fifth of it or two mini lots by doing so, you risk losing a lot less money if the price turns against you in the beginning. If the trade however moves in the desired direction, you can add to the position This, of course, means that you would profit less, compared to if you entered with the full standard lot, but it also means you would have lost less, if prices had turned against you. Second, scaling in allows you to choose the best entry point for your trade. It is quite possible that your analysis of the current market situation is correct, but you haven’t chosen the most suitable level to enter a position. Scaling in gives you more time to assess the situation. Very often you will have 2 or 3 favorable entry levels and sometimes the area is not a precise price but rather a range, especially on hourly and bigger time frames. This is why scaling in allows you to enter a trade even if you’ve missed the perfect entry-level and still manage to achieve profits.

How to Scale into Winning Trades?

First, identify your ideal position size for each trade, you should not risk more than 1% to 3% of your portfolio in one trade. If your ideal position size is three standard lots use one lot at a time for every buy signal as shown in figure 1. First, buy signal with one standard lot when the price breaks out the neckline of the inverted head and shoulders. Second buy signal with another standard lot when price breaks above the resistance level to confirm trend continuation opportunity. Third, buy signal with the final standard lot when the price bounces up from a support level now trader has a full position running.

Disadvantages of scaling into trades

However, it is worth considering that scaling into a trade also has certain disadvantages, which is the reason why not everyone is using it. The main downside of this strategy is that you will always have the largest position at the final phase of the trend or before a large correction, which could be devastating for your account if a sudden price reversal occurs and you haven’t limited losses through protective stops.

Should Traders scale-out from positions?

Scaling out of a trade is used for achieving similar goals as scaling in risk reduction, locking in profits, limit losses. Scaling out means selling a fraction of your total exposure after your position has become profitable, thus locking in some profit, while leaving other positions open in order to benefit, if prices continue to advance. This strategy allows the investor to take profits while the price is increasing, rather than trying to time the peak price. If the actual value continues to increase, however, the investor could be selling a winner too early.

How to Scale-out Winning Trades?

The main goal of using this technique is to stay with the profit and avoid a loss situation as much as possible. If you have a winning position of three standard lots you can use any trailing method or exit strategy to close a portion of your positions as the price moves upward. In figure 2 we use RSI Oscillator to exit the first and second standard lots when the indicator cross below the overbought area below level 70 which means downward correction may occur then exit the last standard lot when the price breaks below the support level.

Scaling In And Out of Trading Positions (2)


Figure 2

Disadvantages of scaling out trades

A negative aspect of scaling out worth mentioning, which especially novice traders find disturbing, is a market that continues to move in your direction and even speeds up significantly after your initial exit. This might upset new traders but if this happens search for new good entries in the direction of the trend and always remembers you cannot get benefit from every price movement.

Should I scale into a losing position?

As you can see, the idea of scaling in or pyramiding can be an extremely profitable way to maximize profits. However, it only works with winning trades. Sure, you might get lucky and come out ahead by adding to a losing position, but the odds aren’t in your favor. You want to compound winning trades, not losing ones. The latter will only serve to eat away at your trading account that much faster.

The content published above has been prepared by CFI for informational purposes only and should not be considered investment advice. Any view expressed does not constitute a personal recommendation or solicitation to buy or sell. The information provided does not have regard to the specific investment objectives, financial situation, and needs of any specific person who may receive it, and is not held out as independent investment research and may have been acted upon by persons connected with CFI. Market data is derived from independent sources believed to be reliable, however, CFI makes no guarantee of its accuracy or completeness, and accepts no responsibility for any consequence of its use by recipients.

Scaling In And Out of Trading Positions (2024)

FAQs

How do you scale in and out of positions? ›

Individual traders commonly use scaling in when they enter in the direction of the trend during a pullback and when prices move higher in the trend direction to improve their dollar cost average. And scaling out means that when you exit, you exit only part of your position and look to exit the rest later.

How to scale in and out of trade? ›

scaling into a trade means that you enter with just a fraction of the intended amount that you wish to trade and then add to the position as the trade develops. scaling out means that you exit fractions of your position to lock in profit and leave in positions to take advantage of any further price runs.

How do you scale a position in trading? ›

To scale in, you select two or more entry levels for a trade instead of one. You open your position at the first entry level with a small total size, then add to it at each subsequent one.

What does it mean to scale out a position? ›

To scale out of a trade is to incrementally sell a portion of one's long position as the stock price rises. This profit-taking strategy helps reduce the risk of missing the market's high. Scaling out risks selling shares too early in a rising market and limiting potential gain.

How to scale into a position? ›

You open your position at the first entry level with a small total size, then add to it at each subsequent one. This is particularly useful if, say, you have identified two possible entry points – one that offers a higher return but comes with more risk, and a safer option with lower potential profits.

How do you scale effectively? ›

Ten top tips to scaling up your business
  1. A clear vision and strategy. ...
  2. Strong management team. ...
  3. Data-led decision making. ...
  4. Market Differentiation. ...
  5. Access to finance. ...
  6. Talent strategy. ...
  7. Efficient operations and processes. ...
  8. Customer focus.
Mar 13, 2024

When to scale up in trading? ›

Scaling in or scaling up involves opening a trade with smaller quantities of lots and gradually increasing the lots as the trade progresses in favour. The entry points can be two or more, depending on the trend.

How do you scale options trading? ›

There are two primary approaches when it comes to increasing trading size. One could increase the individual position's risk/buying power requirement (such as by using a strangle instead of an iron condor), and by increasing the number of contracts (such as by doubling or tripling the original iron condor positions).

How do you scale a trading view? ›

The scale settings button is available directly below the price scale. If users have more than one price scale on the chart, a letter will be displayed in place of the settings button. Users should click the letter that indicates the scale to open the corresponding scale settings.

How do you calculate trading positions? ›

3. The Position Size
  1. Too many traders invest inconsistent amounts in each trade whereas they have only to follow a few rules. ...
  2. Position size = ((account value x risk per trade) / pips risked)/ pip value per standard lot.
  3. ((10,000 US Dollars X 2%) / 50) / 9.85 = (200 USD / 50 pips) / 9,85 =

What does scaling in position mean? ›

Scaling in doesn't mean weighing yourself before, during, and after a trade (although it doesn't hurt to monitor that too!). Scaling basically means adding or removing units from your original open position. Scaling can help you to adjust your overall risk, lock in profits, or maximize your profit potential.

How to scale out of a swing trade? ›

Scaling out works in the same way. Perhaps you sell one piece of your position into strength to immediately take some profits off the table and then set a trailing stop for the rest. So rather than buying or selling your entire position at once, you do it in smaller pieces.

What is the strategy of scaling out? ›

The most important part is that during a scaling-out, your trade size in contracts needs to be large enough to take one-third of your position out when you feel the signal to do it. You can take out another third with another signal afterwards. The last third stays until the end.

Is it better to scale up or out? ›

In short, if you have a bigger budget and expect a steady and large growth in data over a long period of time and need to distribute an overstrained storage workload across several storage nodes, scaling out is the best option.

What is the meaning of scale in and scale out? ›

Autoscaling is more common when scaling horizontally because scaling out or in means just adding or removing instances of a resource and your app continues running without interruption as new resources are provisioned. If demand drops, resources can be shut down seamlessly without downtime and de-allocated.

What is scaling out and scaling in? ›

Scale-out and scale-up architectures—also known, respectively, as horizontal scaling and vertical scaling and scale in and scale down—refer to how companies scale their data storage: by adding more hardware drives (scale up/vertical scaling), or by adding more software nodes (scale out/horizontal scaling).

How do you work out scaling? ›

How do you Find the Scale Factor? The scale factor can be calculated when the new dimensions and the original dimensions are given. The basic formula to find the scale factor of a figure is: Scale factor = Dimension of the new shape ÷ Dimension of the original shape.

References

Top Articles
Latest Posts
Article information

Author: Carmelo Roob

Last Updated:

Views: 5885

Rating: 4.4 / 5 (65 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Carmelo Roob

Birthday: 1995-01-09

Address: Apt. 915 481 Sipes Cliff, New Gonzalobury, CO 80176

Phone: +6773780339780

Job: Sales Executive

Hobby: Gaming, Jogging, Rugby, Video gaming, Handball, Ice skating, Web surfing

Introduction: My name is Carmelo Roob, I am a modern, handsome, delightful, comfortable, attractive, vast, good person who loves writing and wants to share my knowledge and understanding with you.